best antenna for dji goggles v2 ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack - LHCP
SKU: 93230305417
best antenna for dji goggles v2

best antenna for dji goggles v2 ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack - LHCP

Sale price$23.35 Regular price$25.94
Save 10%

Pay in installments of $6.49 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 30 - Jul 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

best antenna for dji goggles v2 ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack - LHCPThe ORT Helical 3 Turn 5. 8GHz DJI Goggles 2 Antenna 2 Pack provides superior axial ratio performance compared to lower quality circular patch antennas. Its lightweight design makes it perfect for an FPV Goggles setup, and suitable for even the toughest RF environments, like those with buildings and trees that can block signals. Get industry leading signal strength and penetration with ORT. Two sets of antennas with MCX male connectors for PNP on your

The ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack provides superior axial ratio performance compared to lower quality circular patch antennas. Its lightweight design makes it perfect for an FPV Goggles setup, and suitable for even the toughest RF environments, like those with buildings and trees that can block signals. Get industry-leading signal strength and penetration with ORT.

Two sets of antennas with MCX male connectors for PNP on your DJI Goggles 2 to replace the default linear antenna. Pull out your default DJI Goggles 2 linear antennas' and plug in this fine tuned LHCP Helical 3 turn for a range boost & better penetration to run with your O3 compatible quads.

Old Radio Transmission, is passionate about antenna’s that’s the reason why their antenna’s work flawlessly. They have tested the Helical 3 Turn whilst flying a whoop, the transition from indoor to outdoor flying was not an issue with these antennas!

Check out all our FPV Receivers & Antennas and all our ORT antennas!

Features

  • Made in mind for the DJI Googles 2!
  • Hand Tuned, providing wide beam width with 180 degree coverage and greater penetration through trees and dense material.
  • High quality Enameled Supreme Wire (anti rust).
  • Original Low loss RG402 cable.
  • High quality acrylic, providing premium look.
  • Effective range, 6~10km and beyond on 600mW Vtx (depends on flying area noise level, receiver sensitivity and FPV setup)


Specifications 

  • Freq Channel: 5300 ~ 6500 MHz
  • Gain (dBi): 7 dBic
  • SWR/S11: < 1:1.3
  • Beam width: 150deg
  • Polarization: Circularly Polarized – LHCP
  • Gain Pattern: Directional (needs to be pointed in the general flying area)
  • Connector: MCX Male (for use with DJI Goggles 2)
  • Weight: 26.7g ea.

Includes

  • 1x ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack - LHCP - Black
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93230305417

Discover Niche Categories That Outsell best antenna for dji goggles v2

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 1090 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
Cynthia perez
Omaha, US
★★★★★ 5
Great
Size: 36inch, Color: Light Walnut, Size: 36inch, Color: Light Walnut
Got the job done very light weight but durable great condition installation was super easy
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
V
Verified Purchase
Vanesa French
Phoenix, US
★★★★★ 4
Not a bad buy
Size: 36inch, Color: Light Walnut, Size: 36inch, Color: Light Walnut
Very Light weight, they look great though. Fairly easy to put together. Came with all parts I’ll be it scattered and the screws don’t look sturdy but I won’t be using the ones that it came with. Overall, fair price, quality is fair as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 16, 2026
B
Verified Purchase
Becky Z.
Pawtucket, US
★★★★★ 5
Love these shelves!
Size: 48inch, Color: Light Walnut
These are incredible for the price! Feel & look like wood. Easy-ish to install - just take your time, measure twice & use a level. Very sturdy! Great hardware & instructions. Now my daughter wants some for her apt.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2025
A
Verified Purchase
Amber Danielle Farmer-Sutherland
Lexington, US
★★★★★ 5
Perfect!
Size: 24inch, Color: Walnut, Size: 24inch, Color: Walnut
Perfect! Just what I wanted. Sturdy, came with all the pieces, and very pretty wood.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 20, 2025
K
Verified Purchase
KB
Omaha, US
★★★★★ 3
They worked for replacing shelves but I wouldn’t mount them on my wall
Size: 24inch, Color: Walnut
I specifically bought these shelves because of their dimensions. I have a built-in cabinet and when we moved in 6 or so years ago, the previous owners must have taken them with them when they moved. It’s been bothering me the whole time I’ve lived here and wanted to make some but just never found the time to get around to it. I measured them out and these floating shelves were perfect for the dimensions I needed to replace the missing shelves. Would I put these on my wall(s)? Absolutely not unless I corrected the mounting issues. One thing that really stuck out to me was how bad the design was for mounting these shelves. When I took them out of the packaging, the brackets were falling out of the back everywhere. This did not inspire too much confidence that if I hung them up, they would be stable. I’ve had a ton of floating shelves similar to this mounting design, but the arms that the boards slide into on the wall for this particular shelving are thin and flat (while being easily mailable with your hand alone) in comparison to every other one I’ve had being round, or at least decently thick, sometimes with additional screws that you can insert under the board and into the mounting arms for extra stability. Also, any time I’ve ever had to mount a similar floating shelf, it took some finesse and strength to release the mounting arms from the back of the shelf because they fit very snugly. The fact that the mounting brackets were falling out of the back means that they are not snug and prone to be very loose. Another thing that stuck out to me is that the shelves are hollow. Now, for my purposes, this is fine, but again, detracts significantly from the confidence that these would be stable if mounted on the wall and would most likely droop when weight was applied. I also took issue with the fact the boards had no protective covering and were jammed into a box, with the hardware pressing against one of the boards tightly. I just flipped the shelf over to mask the defect from packaging but the side I wanted to use because it had better coloring was the damaged side. Mine did not come with any mounting directions but some common sense would be all you needed to put up something so simple. However, it did not come with a template to mark the wall for spacing, which adds to the difficulty because you have to have precise DIY measurements to slide the boards onto the mounting arms correctly. To be honest, if I were to mount these, I would bypass the shoddy mounting provided and go with some heavy, durable brackets underneath. Overall, these shelves worked for my purposes but I can see how the reviews would be very mixed in terms of mounting and quality. I did get these on a limited time deal and they were priced at approximately $8 per shelf, which was a really good deal to get 4 shelves for that price in comparison to the “normal” price resulting in approximately $11/shelf. I wouldn’t have paid full price for these and would have been highly disappointed had I with the intention to mount them, especially since I would have needed to provide better and more stable mounting hardware. They are lesser quality than others within the same price range and I think you could do much better if your intention is to mount them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 11, 2025

recommand products